Silica Sand For Industrial Use

FOR INDUSTRIAL USE

Our silica sand consist of sub-rounded to sub-angular in form or shape and composed of almost pure quartz which is ideally suited for industrial applications such as glass making, construction and hydraulic fracturing, etc.

IS01

0.5mm - 1mm
Applications: Paint Texture

IS02

1mm - 2mm
Applications: Epoxy Flooring

IS03

2mm - 3mm

IS48

0.4mm - 0.8mm

IS29

0.6mm - 1.6mm
Applications: Sand Blasting

IS36

0.3mm - 0.6mm
Applications: Metal Casting

IS13

0.1mm - 0.3mm

IS14

0.1mm - 0.4mm

IS15

0.1mm - 0.5mm

Paint Texture

Mixing sand into interior paint is an inexpensive way to add interest and texture to your walls. We have fine, medium or coarsely ground silica sand.

Paint and Coatings

Silica improves reflectance, brightness and color consistency for any large scale uses. Industrial sand therefore plays a role in keeping the buildings, cars, and boats from looking worn.

Paver Sand

Our sand is finely graded and dried to remove all water and moisture which is perfect for block paving and paving slabs.

Tile Adhesives & Grouts

Our ground silica sand are use to improve durability of adhesives due to low water absorption and high permeability.

Epoxy Flooring

In the epoxy flooring industry one of the most commonly used minerals is quartz sand. Our white quartz sand is perfect as an anti-slip aggregate.

Sand Blasting

Abrasive blasting is more commonly known as sand blasting. Silica sand is used as abrasive material to remove impurities from surfaces; this is because sand particles are almost the same size and the edges of the particles are sharp.

Glass Production

One of the most common applications for silica sands is in glass production. In the production of glass, silica should be chemically pure composed of over 98% (SiO2) and must contain between 0.025% and 0.04% of iron oxide (Fe2O3).

Boiler Sand

Silica sand as bed material for boiler is used to even out heat fluctuations and make the combustion of the fuel more efficient.

Frac Sand

"Frac sand" is chemically high purity quartz sand with very durable and very round grains. It is a crush-resistant material produced for use by the petroleum industry.

Available Grain Sizes

  • Granules:
    2mm - 4.76mm
  • Coarse:
    1mm - 2mm
  • Medium:
    0.5mm - 1mm
  • Fine:
    0.125mm - 0.5mm
  • Very Fine:
    0.075mm - 0.0125mm
  • Silt:
    63 Microns
  • White / Off-White / Beige

  • Yellowish / Brown / Red

    Available Colors

    Chemical Composition


    • Silicon Dioxide (SiO2):
      <98.58%
    • Iron Oxide (Fe2O3):
      >1.74%
    • Aluminum Oxide (Al2O3):
      >0.02%
    • Potassium Oxide (K2O):
      0.04%
    • Chromium Oxide (Cr2O3):
      0.006%
    • Barium Oxide (BaO):
      <0.01%
    • Calcium Oxide (CaO):
      <0.01%
    • Magnesium Oxide (MgO):
      0.02%
    • Manganese Oxide (MnO):
      0.02%
    • Sodium Oxide (Na2O):
      <0.01%
    • Phosphorus Pentoxide (P2O5):
      0.003%
    • Sulfur Trioxide (SO3):
      0.029%
    • Titanium Dioxide (TiO2):
      0.03%
    • Vanadium Oxide (V2O5):
      0.006%
    • Zirconium Dioxide (ZrO2):
      0.01%

    Physical Properties


    • Type:
      Processed / Natural
    • Color(s):
      White (W)
      Off-white / Beige (W)
      Yellowish / Brown (B)
    • Loss On Igniton (L.O.I):
      -0.25
    • Shape:
      Sub-Angular
      Sub-Rounded
    • True Gravity:
      >2.65
    • Bulk Density:
      1.54 g/cm3
    • Acid Resistance:
      0.17%
    • Hardness (MOH):
      7
    • Attrition Loss:
      <1%
    • ph Level:
      7
    • Turbidity:
      <100
    • Silt Content:
      Minimal To None
    • Moisture:
      0.3%

    Request Certificates


    Mines And Geosciences Bureau Silica Analysis
    Intertek Philippines Silica Analysis

    Landline:
    (02) 8634 1617

    Pls. Share!

    And Let everyone know what we offer..

    0
    Shares